How do I set/clear the RAID mode on my Mobius 2-Bay?

By oyensupport • Posted in Mobius 2C RAID

Note: If switching from one RAID mode to another, the "clear RAID" procedure must be performed first.

Set RAID Procedure:

1. Set the switch on the Mobius to the desired mode.

2. Connect the Mobius to the host computer.

3. Press & hold the MODE button while turning on the power.

4. Continue holding the MODE button for 7-10 seconds.

5. Release the MODE button. The RAID mode is now congured.

If changing RAID modes, you rst must perform a “Clear” procedure to remove the previous RAID mode.

Clear Procedure:

1. Set the switch on the Mobius to JBOD.

2. Connect the Mobius to the host computer.

3. Press the MODE button while turning on the power.

4. Hold the MODE button for 7-10 seconds.

5. Release the MODE button. Any previous RAID mode is removed and the drives are now set for JBOD mode.